To Next Page
B
bcoxSep 8, 2025
What causes the lower thread to not cut on a Brother Sewing Machine?
- NNicole JonesSep 8, 2025
If the lower thread is not cut on your Brother Sewing Machine, increase the lower thread tension.
What causes the lower thread to not cut on a Brother Sewing Machine?
If the lower thread is not cut on your Brother Sewing Machine, increase the lower thread tension.
What to do if the lower thread is not tight on my Brother BAS-326H-484 Sewing Machine?
If the lower thread is not tight on your Brother Sewing Machine, increase the lower thread tension or reduce the upper thread tension.
How to fix lower thread winding to one side on Brother BAS-326H-484 Sewing Machine?
If the lower thread winds to one side on your Brother Sewing Machine, adjust the height of the bobbin winder tension assembly.
How to adjust lower thread winding amount on Brother BAS-326H-484 Sewing Machine?
If the lower thread winding amount is incorrect on your Brother Sewing Machine, adjust the position of the bobbin presser.
General| Brand | Brother |
|---|---|
| Model | BAS-326H-484 |
| Category | Sewing Machine |
| Language | English |
Explains safety indications and their meanings for safe operation.
Specifies environmental conditions for proper sewing machine operation.
Details safety measures required during machine installation.
Highlights warnings for dangerous voltage and moving parts.
Diagram detailing table processing for machine installation.
Step-by-step guide for installing the control box.
Instructions for mounting and securing the machine head.
Procedure for connecting the ground wire for safety.
Procedure for connecting the power cord to the electrical outlet.
Procedure for correctly installing the sewing needle.
Detailed steps for threading the upper thread correctly.
Guidance on adjusting upper and lower thread tension.
Instructions for starting and performing sewing.
How to use the emergency stop switch to halt operations.
Procedure for cleaning the rotary hook assembly.
Steps for draining oil and checking the regulator.
Procedure to check the machine head switch status.
Guide for setting the timing between needle and rotary hook.
Instructions for replacing knives and adjusting air pressure.
Details errors related to switches and their remedies.
Details errors related to the motor and their remedies.
Details errors related to the feed mechanism and their remedies.
Details errors related to communication and memory.
