Brother BAS-341H - 3-3. Installing Oil Pan and Support Lever Base; 3-4. Installing the Machine Head

3. INSTALLATION
6
BAS-341H, BAS-342H
3-3. Installing the oil pan and support lever base
(1) Oil pan
(2) Wood screws [4 pcs.]
(3) Oiler
(4) Support lever base
(5) Plain washers [2 pcs.]
(6) Spring washers [2 pcs.]
(7) Bolts [2 pcs.]
3-4. Installing the machine head
1. Place the machine head onto the
table.
NOTE:
・ Use a crane or hoist to install the
sewing machine.
・ Be careful of the following when
lowering the machine head onto the
table.
! Do not let any cords get clamped
between the machine head and
the table.
! Do not place the machine head
cushion (c) on top of the oil pan
(a) or the support lever base (b).
! Do not let the side (d) of the
machine head switch lever touch
the support lever base (b).
(1) Rubber bushes (2 pcs.)
(2) Hinge holders (2 pcs.)
(3) Plain washers [4 pcs.]
(4) Spring washers [4 pcs.]
(5) Bolts [4 pcs.]
(Continued on next page)
2585B
3964M
Table