4. PREPARATION BEFORE SEWING
29
BAS-341H, BAS-342H
4-6-2. Upper thread tension
Use the digital tension to adjust the
tension as appropriate for the material
being sewn. (Refer to “Setting the
tension value” below.)
Turn the tension nut (1) (sub-tension) to
adjust so that the upper thread trailing
length is about 42 mm.
Setting the tension value
Touch the △ and ▽ keys (2) on the
sewing operation screen to increase or
decrease the Tension value.
3598B
Weaker
Stronger
[Sewing operation screen]
(2)
To Next Page
Loading...
Need help?
General
