3. INSTALLATION
17
BAS-341H, BAS-342H
3-15. Connecting the power cord
CAUTION
Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric
shock, and problems with correct operation may also occur.
Connect cords that match the voltage
specifications.
< EU specifications＞
(1) Filter box
(2) Screws [4 pcs.]
(3) Staples [4 pcs.]
(4) Power cord
1. Attach an appropriate switch and cable
to the power cord (4). (The green and
yellow wire is the ground wire.)
2. Insert the power plug into a
properly-grounded electrical outlet.
NOTE:
• Take care when tapping in the staples
(3) to make sure that they do not pierce
the cords.
• Do not use extension cords, otherwise
machine operation problems may
result.
3673B
Green and yellow wire (ground wire)
Control
box
Leg
To Next Page
Loading...
