Why is the scanned image from my Brother CM100DM Cutter red?
If the Brother Cutter scanned image is red, it is likely that when the optional scanning mat is used, scanning is performed without peeling off the blue tape. Peel off the blue tape from the optional scanning mat before scanning.
Why is my Brother Cutter scanning unwanted images?
If unwanted images are scanned with your Brother Cutter, it may be because the scanning area is incorrectly specified. In “Scan to USB” mode, specify the paper size with the “Scan Size” setting. Also, in “Direct Cut” or “Scan to Cut Data” mode, trim the image in the editing screen after scanning.
How to turn on Brother CM100DM?
If the Brother Cutter cannot be turned on, check that the AC adapter is connected to the machine and that the power cord is connected to the AC adapter and electrical outlet.
Why is the drawn line thicker or thinner than intended on my Brother Cutter?
If the drawn line is thicker or thinner than intended on your Brother Cutter, adjust the settings for “Draw Speed” and “Draw Pressure” in the settings screen.
Important notice regarding usage and licensing.
Key notices and disclaimers about the machine and its usage.
Essential safety guidelines for operating the machine.
Safety precautions related to power supply, AC adapter, and cords.
Guidelines for setting up the machine in a suitable environment.
Cautions for safe operation, handling moving parts, and child safety.
Cautions regarding mat handling, blades, and general machine operation.
Regulatory compliance information.
Overview of built-in patterns and scanning features.
Description of the machine's components and their functions.
Steps for unpacking, setup, and initial power-on.
Chart for selecting compatible mats and cutting blades.
Instructions for attaching various materials to the mat.
Selecting a test pattern and loading the mat for cutting.
Procedure for cutting material and unloading it from the machine.
Performing trial cuts to ensure correct settings.
Evaluating trial cuts and adjusting blade extension.
Detailed configuration options for machine operation.
Configuration of seam allowance, pattern spacing, and auto shutdown.
Guides for cutting patterns using the machine.
Step-by-step guide to cutting advanced patterns.
Methods for selecting single or multiple patterns for editing.
Functions for editing and manipulating patterns.
Advanced functions for pattern sizing and piece editing.
Tools for arranging, selecting, deleting, and moving patterns.
Detailed pattern manipulation: editing, grouping, and merging outlines.
Arranging patterns automatically for material efficiency.
Using scanned images as a background for pattern placement.
Preparing and executing drawing operations with pens.
Drawing patterns and cutting outlines with seam allowances.
Scanning images for direct cutting without conversion.
Adjusting outline distance and applying frames to scanned images.
Step-by-step guide to creating cutting data from an illustration.
Managing created cutting data: saving and loading.
Scanning specifications and compatible materials.
Step-by-step guide to scanning an illustration to a USB flash drive.
Procedure for scanning images and saving them to USB.
Guidelines for replacing mats, blades, and support sheets.
Steps for removing and installing the cutting blade.
Instructions for cleaning the mat, holder, and internal components.
Cleaning internal parts and scanner glass.
Calibrating the touch screen for accurate input.
Solutions for power, mat loading, and paper/fabric jam problems.
Troubleshooting problems encountered during cutting and drawing operations.
Solutions for problems encountered during scanning operations.
List of error messages and their corresponding solutions.
List of available optional accessories for purchase.
To Next Page
General
