21
3. Carefully guide the USB cable into the
trench as shown below, following the
trench round and toward the back of the
machine.
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
DO NOT connect the machine to a
USB port on a keyboard or a non
powered USB hub.
8
Lift the scanner cover to release the lock.
Gently push the scanner cover support
down and close the scanner cover.
9
Turn on the machine by plugging in the
power cord.
0
If the Deviceselector window is open,
select USB, and then click OK.
A
Select Applications from the Go menu.
B
Open the Utilities folder.
C
Open the Print Center icon.
D
Click Add.
(Example for the U.K.)
Continued...
Installing the Driver & Software
Setting Up
the Machine
For
Network Users
Mac OS
®
X
To Next Page
Loading...
Need help?
General
