Brother DCP-110C - Page 26

24
Installing the Driver & Software
8
Lift the scanner cover to release the lock.
Gently push the scanner cover support
down and close the scanner cover.
9
Turn on the machine by plugging in the
power cord.
0
Open the Chooser from the Apple menu.
A
Click the Brother Ink (IP) icon, and then
select BRN_xxxxxx.
Close the Chooser.
The setup is now complete.
For Network Interface Cable Users (DCP-310CN only)
■
xxxxxx are the last six digits of the
Ethernet address.
■
Please see Network User’s Guide
Chapter 5 on the CD-ROM for more
information about connecting the
machine to a Macintosh
®
network.
(Example for the U.K.)
Step 2