1.3.151.3.15 TraTransfer received fax dansfer received fax data / log information (function code: 53)ta / log information (function code: 53)
<Function><Function>
When the machine is unable to print the received fax data due to an error in the printingWhen the machine is unable to print the received fax data due to an error in the printing
mechanism, this function is used to transfer the data to another machine. Themechanism, this function is used to transfer the data to another machine. The
communication management report, communication list, or machine log information can alsocommunication management report, communication list, or machine log information can also
be transferred.be transferred.
<Operating Procedure><Operating Procedure>
(1)(1) Press the [5] anPress the [5] and [3] buttons in thd [3] buttons in this order in the iniis order in the initial statial state of maintenate of maintenance mode. “Fnce mode. “FAXAX
TRANSFER” is displayed on the LCD.TRANSFER” is displayed on the LCD.
•• TTo check tho check the number oe number of files recf files received, peived, press the [1] bress the [1] button. “utton. “1. NO. OF JOB1. NO. OF JOBS” isS” is
displayed on the LCD. Press the [OK] button, and the number of files received isdisplayed on the LCD. Press the [OK] button, and the number of files received is
displayed, for example, “NO. OF JOBS: 10”.displayed, for example, “NO. OF JOBS: 10”.
•• TTo transfo transfer only the cer only the communiommunication mcation managemeanagement reportnt report, press th, press the [2] buttoe [2] button.n.
“2. ACTIVITY” is displayed on the LCD.“2. ACTIVITY” is displayed on the LCD.
•• TTo transfeo transfer the receiver the received data, presd data, press the [3] buttos the [3] button. (The commun. (The communicatinication managemon managementent
report is also transferred.)report is also transferred.)
“3. DOCUMENTS” is displayed on the LCD. If there are no received files, “NO“3. DOCUMENTS” is displayed on the LCD. If there are no received files, “NO
DOCUMENTS” is displayed.DOCUMENTS” is displayed.
•• TTo transfer the coo transfer the communicmmunication lisation list (latest cot (latest communicammunication infotion informatiormation), press the [4n), press the [4]]
button. “4. COM.LIST (NEW)” is displayed.button. “4. COM.LIST (NEW)” is displayed.
•• TTo transfer tho transfer the communie communication lication list (informst (information for the pation for the past three erroast three errors), press thrs), press the [5]e [5]
button. “5. COM.LIST (ERR3)” is displayed on the LCD.button. “5. COM.LIST (ERR3)” is displayed on the LCD.
•• TTo transfeo transfer the maintenr the maintenance inforance information (lmation (list printeist printed by function cod by function code 77), press thde 77), press thee
[6] button. “6. MNT77LIST” is displayed on the LCD.[6] button. “6. MNT77LIST” is displayed on the LCD.
(2(2)) PPreress ss tthe he [[
OKOK
] button while “2. ACTIVITY”, “3. ] button while “2. ACTIVITY”, “3. DOCUMENTS”, “4. COM.LIST (NEW)”, “5.DOCUMENTS”, “4. COM.LIST (NEW)”, “5.
COM.LIST (ERR3)”, or “6. MNT77LIST” is displayed on the LCD. “ENTER NO. & SET” isCOM.LIST (ERR3)”, or “6. MNT77LIST” is displayed on the LCD. “ENTER NO. & SET” is
displayed on the LCD.displayed on the LCD.
(3)(3) Enter the tEnter the telephoelephone number one number of the receif the receiving macving machine, anhine, and press the [d press the [OK] button aOK] button again.gain.
(4)(4) “Accep“Accepted” is dispted” is displayed for two selayed for two seconds, anconds, and the machind the machine starts de starts dialing to tranialing to transfer thesfer the
data.data.
Note:Note:
•• The number of filThe number of files that can be transes that can be transferred in one opferred in one operatioeration is up to 99. When there aren is up to 99. When there are
100 or more files, the operating procedure below must be performed several times to100 or more files, the operating procedure below must be performed several times to
transfer all files.transfer all files.
•• When there are both colWhen there are both color data files and monoor data files and monochrome datchrome data files, monocha files, monochrome data filerome data filess
are transferred first. When the coare transferred first. When the color function is not supported by the receiving lor function is not supported by the receiving machine,machine,
color data files cannot be transferred and an error occurs.color data files cannot be transferred and an error occurs.
Note:Note:
•• Be sure to enter the telephoBe sure to enter the telephone number using the numerne number using the numerical buttoical buttons. One-toucns. One-touch dialingh dialing
is not allowed in this procedure.is not allowed in this procedure.
•• No station ID No station ID will be attached will be attached to the data to the data which is transferred. Instead, which is transferred. Instead, a cover pagea cover page
and end page as shown on theand end page as shown on the next page
next pagewill be automatically attached.will be automatically attached.
To Next Page
Loading...
