What to do if my Brother DCP-1610NW All in One Printer says 'Document Jam (For ADF models)'?
If your Brother All in One Printer displays 'Document Jam (For ADF models)', it means the document was not inserted or fed correctly, or the document scanned from the ADF was too long. Pull the jammed paper out of the ADF unit.
What to do if my Brother DCP-1610NW All in One Printer shows 'Out of Memory'?
If your Brother All in One Printer displays 'Out of Memory', it means the machine's memory is full. You can either press Start to send or copy the scanned pages, or press Stop/Exit and wait for other operations to finish before trying again. If printing, pressing Stop/Exit will cancel the print job and clear it from the memory. Alternatively, try lowering the print quality.
How to fix 'Cartridge Error' on Brother DCP-1610NW?
If your Brother All in One Printer displays a 'Cartridge Error', it indicates an issue with the toner cartridge. Make sure the toner cartridge is correctly installed in the drum unit, and then place it back into the machine. Also, ensure that you are using a genuine Brother toner cartridge and a Brother Original drum unit.
What does 'Toner Low' mean on my Brother DCP-1610NW All in One Printer?
If your Brother All in One Printer shows 'Toner Low', it means the toner cartridge is nearing the end of its life. Although you can still print, it's recommended to order a new Brother toner cartridge now. This ensures a replacement is available when the LCD shows 'Replace Toner' or 'Toner Ended'.
How to improve poor sending quality on Brother DCP-1610NW?
If you are experiencing poor sending quality with your Brother All in One Printer, try changing the resolution to Fine or S.Fine. You can also try cleaning the scanner.
How to resolve 'Size mismatch' error on Brother DCP-1610NW?
If your Brother All in One Printer displays 'Size mismatch', it means the paper in the tray is not the correct size. Load the correct size of paper into the tray and then set the paper size accordingly.
Why are sent faxes blank from my Brother DCP-1610NW All in One Printer?
If your Brother All in One Printer is sending blank faxes, ensure you are loading the document correctly. When using the ADF or scanner glass, the document should be placed face down.
What does 'Self-Diagnostic' mean on Brother DCP-1610NW All in One Printer and how to fix it?
If your Brother All in One Printer shows 'Self-Diagnostic', it could be due to the fuser unit's temperature. Turn the machine off, wait a few seconds, and then turn it back on. Leave the machine idle for 15 minutes with the power on.
Why are there vertical black lines when sending faxes from my Brother DCP-1610NW?
If you see vertical black lines when sending faxes from your Brother All in One Printer, it's typically caused by dirt or correction fluid on the glass strip.
What causes 'Comm.Error' on Brother All in One Printer?
General| Printer Type | Laser |
|---|---|
| Functions | Print, Copy, Scan |
| Print Resolution | Up to 2400 x 600 dpi |
| Paper Input Capacity | 150 sheets |
| Scanner Type | Flatbed |
| Dimensions | 385 x 340 x 255 mm |
| Duplex Printing | Manual |
| Wireless Standard | IEEE 802.11b/g/n |
| Copy Resolution | Up to 600 x 600 dpi |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Print Speed | Up to 20 ppm |
| Connectivity | USB 2.0 |
| Copy Speed | Up to 20 cpm |
| Mobile Printing | Brother iPrint&Scan |
| Scan Resolution | Up to 600 x 1200 dpi |
| Paper Handling | Manual feed slot |
| Supported Media Sizes | A4, Letter, Legal, Folio |
Complete the Brother Warranty Registration or register online for efficient product registration.
Access the Brother Solutions Center for machine needs, drivers, software, and troubleshooting.
Find contact information for your local Brother office and service center locations.
Guidance on effectively using the provided documentation for your Brother machine.
Explanation of symbols and conventions used throughout the documentation.
Detailed description of buttons and functions for MFC model control panels.
Detailed description of buttons and functions for DCP model control panels.
Explanation of how to use the LCD for on-screen programming with menu keys.
Step-by-step instructions for accessing the machine's menu mode.
Guide for initial setup procedures for specific MFC models.
Guide for initial setup procedures for specific MFC models.
Details on general setup options for specific MFC models.
Details on general setup options for specific MFC models.
Details on general setup options for DCP models.
Configuration and operation details for fax features on specific MFC models.
Configuration and operation details for fax features on specific MFC models.
Details on copy functions and settings for MFC models.
Details on copy functions and settings for DCP models.
Details on printer functions and settings for MFC models.
Details on printer functions and settings for DCP models.
Information on viewing and printing reports for specific MFC models.
Information on viewing and printing reports for specific MFC models.
Network setup and configuration for MFC wireless/wired models.
Network setup and configuration for DCP-1610W models.
Network setup and configuration for DCP-1615NW/1616NW models.
Controls machine power consumption when idle to save energy.
Automatically powers off the machine after a set idle period.
Allows printing to continue after 'Replace Toner' message.
Instructions for selecting the appropriate paper type for printing.
Instructions for setting the paper size in the paper tray.
General instructions for loading documents for fax, copy, or scan.
Instructions for loading documents into the ADF for processing.
Instructions for loading documents onto the scanner glass.
Step-by-step guide on sending a fax from your machine.
Procedure for cancelling an ongoing fax transmission.
Instructions for sending the same fax message to multiple numbers.
Overview of different receive modes based on line services.
Guidance on selecting the correct receive mode for your line.
Set the number of rings before the machine answers in Fax Only/Fax/Tel modes.
Configure the fast double-ring time for voice calls in Fax/Tel mode.
Configure how the machine detects and answers incoming faxes.
Instructions for storing frequently used numbers as Speed Dials.
Procedures for modifying or removing stored Speed Dial entries.
Methods for dialling numbers: manual, speed dial, search, and redial.
How to view or print the stored Caller ID information.
Configure machine to store and send received faxes to your PC.
Send files from your PC as a standard fax.
Making telephone calls using the handset with the dial pad or Speed Dial.
Step-by-step guide for initiating a telephone call.
How to place a call on hold and release it.
Connecting an external Telephone Answering Device (TAD).
Details on connecting TADs, external telephones, and PABX systems.
Instructions for connecting external or extension telephones.
Step-by-step instructions for making copies.
Making one-sided and double-sided copies of identification cards.
Quickly set copy settings like quality, brightness, and contrast.
Scan documents as PDF files using the ControlCenter4 software.
Instructions for scanning documents directly to a PC using the SCAN key.
Customize the SCAN key settings using ControlCenter4.
Information on toner cartridges and drum units, including model names.
Basic checks to perform when troubleshooting machine issues.
Common error messages, their causes, and recommended actions.
Troubleshooting tips for common issues like telephone/fax problems.
Tips and checks for resolving issues related to print quality.
Steps to handle and clear document jams in the Automatic Document Feeder.
Instructions for clearing paper jams from the machine.
Methods for transferring faxes or fax journal reports to PC or another fax.
Guidelines for cleaning the machine's exterior and interior parts.
General specifications for DCP-1600/1601 and MFC-1900/1901/1905 models.
Specifications for DCP-1610W/1615NW/1616NW and MFC-1910W/1911NW/1916NW.
Details on supported document sizes for ADF and scanner glass.
Technical specifications related to fax modem speed, resolution, and transmission.
Technical specifications for scanning functions like resolution and color depth.
Technical specifications for printer functions like print speed and resolution.
Details on network connectivity, protocols, and security settings.
To Next Page
