Brother DCP-1617NW User Manual

 
ConfidentialConfidential
Brother Laser MFCBrother Laser MFC
SERVICE MANUALSERVICE MANUAL
DCP-
DCP- 1510/1511510/1511/1512/1511/1512/1514/1518/154/1518/151919
MFC-1810/1811/1813/1814/1815/1816/MFC-1810/1811/1813/1814/1815/1816/
1818/18191818/1819
Read this manual thoroughly before maintenance work.Read this manual thoroughly before maintenance work.
Keep this manual in a convenient place for quick and easy reference at all times.Keep this manual in a convenient place for quick and easy reference at all times.
April 2013April 2013
SM-FAX146SM-FAX146
8C5G*8C5G*
(12)(12)
DCP-DCP- 1600/1601600/1601/1602/1601/1602/1608/16198/1619
MFC-1900/1901/1905/1906/1908MFC-1900/1901/1905/1906/1908
DCP-DCP- 1610W/161610W/1612W/161512W/1615NW/1616NWNW/1616NW//
1617NW/1618W/1622W/1623W1617NW/1618W/1622W/1623W
MFC-1910W/1911W/1911NW/1912W/MFC-1910W/1911W/1911NW/1912W/
1915W/1916NW/1919NW1915W/1916NW/1919NW
Original models (with fan/ without fan):Original models (with fan/ without fan):
Models support smaller than A4/letter size:Models support smaller than A4/letter size:
Models support smaller than A4/letter size with LAN function:Models support smaller than A4/letter size with LAN function:

Brother DCP-1617NW Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Resolution	Up to 2400 x 600 dpi
Paper Input Capacity	150 sheets
Automatic Document Feeder	No
Display	LCD
Memory	32 MB
Output Tray Capacity	50 sheets
Scanner Type	Flatbed
Copy Resolution	Up to 600 x 600 dpi
Dimensions	385 x 340 x 255 mm
Print Speed	Up to 20 ppm
Connectivity	USB 2.0
Paper Size	A4, Letter, Legal, Folio
Copy Speed	Up to 20 cpm
Operating Systems Compatibility	Windows, macOS, Linux
Scan Resolution	Up to 600 x 1200 dpi

Summary

CHAPTER 1 TROUBLESHOOTING

1. INTRODUCTION

General purpose and initial checks for troubleshooting.

2. OVERVIEW

Describes machine parts and their functions.

3. ERROR INDICATIONS

Lists error codes and messages for diagnostics.

4. TROUBLESHOOTING

Details specific problem resolutions.

CHAPTER 2 DISASSEMBLY/REASSEMBLY

1. PACKING

Instructions for packaging the machine.

2. TIGHTENING TORQUE LISTS

Specifies torque values for screws during assembly.

4. OVERVIEW OF GEARS

Illustrates gear arrangements within the machine.

5. HARNESS ROUTING

Shows cable routing diagrams for internal components.

6. DISASSEMBLY FLOW CHART

Visual guide for the sequence of disassembly steps.

7. DISASSEMBLY PROCEDURE

Step-by-step instructions for disassembling parts.

CHAPTER 3 ADJUSTING AND UPDATING SETTINGS AS REQUIRED AFTER PARTS REPLACEMENT

1. IF YOU REPLACE THE MAIN PCB ASSY

Procedures after replacing the main PCB, including firmware updates.

2. IF YOU REPLACE THE LASER UNIT

Procedures after replacing the laser unit, including calibration.

3. IF YOU REPLACE THE DOCUMENT SCANNER UNIT OR CIS UNIT

Procedures after replacing scanner components, including firmware.

4. IF YOU REPLACE THE LOW VOLTAGE POWER SUPPLY PCB UNIT

Procedures after replacing the low voltage power supply PCB.

5. IF YOU REPLACE THE PANEL UNIT

Procedures after replacing the panel unit, checking operations.

CHAPTER 4 SERVICE FUNCTIONS

1. MAINTENANCE MODE

Overview of accessing and using the machine's maintenance mode.

1.1 How to Enter Maintenance Mode

Detailed steps to access the service maintenance mode.

1.2 List of Maintenance Mode Functions

A table of available maintenance functions and their references.

1.3 Details of Maintenance Mode Functions

Explains specific maintenance functions and their procedures.