Brother DCP 585CW - Color Inkjet - All-in-One - Page 116

Control panel setup
106
6
Header 6
This selection allows the contents of the mail header to be printed when the received message is printed.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Mail RX.
Press OK.
e Press a or b to choose Header.
f Press d or c to choose All, Subject+From+To or None.
Press OK.
g Press Stop/Exit.
For Touchscreen models 6
a Press MENU.
b Press a or b to choose Network.
c Press a or b to choose E-mail/IFAX.
d Press a or b to choose Setup Mail RX.
e Press a or b to choose Header.
f Press to choose All, Subject+From+To or None.
g Press Stop/Exit.