Configuring your machine for a network with an Ethernet cable connection
13
2
c Double-click the unconfigured device.
Windows
®
Macintosh
®
Note
• If the print server is set to its factory default settings (if you don’t use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the Node Name and Ethernet address by printing the Network Configuration List. (See
Printing the Network Configuration List on page 125 for information on how to print the Network
Configuration List on your print server.)
To Next Page
Loading...
