Brother DCP 585CW - Color Inkjet - All-in-One - Page 96

Control panel setup
86
6
d Press a or b to choose TCP/IP.
Press OK.
e Press a or b to choose DNS Server.
Press OK.
f Press a or b to choose Primary or Secondary.
Press OK.
g Enter the DNS Server address.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first three-digit number for the DNS Server address.
Press c to enter the second three-digit number. Repeat this step until you have entered the fourth three-
digit number to complete the DNS Server address. Press OK.
h Press Stop/Exit.
For MFC-5490CN 6
a Press Menu, 5, 1, 8.
b Press a or b to choose Primary or Secondary.
Press OK.
c Choose 1 to change. Enter the DNS Server address.
Press OK.
d Press Stop/Exit.
For Touchscreen models 6
a Press MENU.
b Press Network.
c (For Wired) Press Wired LAN.
(For Wireless) Press WLAN.
d Press TCP/IP.
e Press a or b to display DNS Server and then press DNS Server.
f Press Primary or Secondary.
g Enter the DNS Server address.
Press OK.
h Press Stop/Exit.