Brother DCP-585CW - Set LCD Contrast; Adjust LCD contrast and angle; Set Date and Time; Set date and time

8
8
Set the LCD contrast
(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a Press Menu.
b Press a or b to choose General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose LCD Contrast.
e Press d or c to choose Light, Med or Dark.
Press OK.
f Press Stop/Exit.
9
Set the date and time
Setting the date and time allows the machine to clean
the print head regularly and maintain optimum print
quality. It also allows the machine to name files
created when using the Scan to Media feature.
a Press Menu.
b Press a or b to choose Initial Setup.
Press OK.
c Press a or b to choose Date&Time.
Press OK.
d Press a or b repeatedly to enter the last two
digits of the year, and then press OK.
(e.g. Enter 0 8 for 2008.)
e Repeat for Month and Day, and Hours and
Minutes in 24-hour format.
f Press Stop/Exit.
Note
You can also adjust the angle of the display by
lifting it.
Date&Time
Year:20
08
MENU Input & Press OK