6
Setting Up the Machine
Do not connect the Parallel or USB
cable yet.
1
Make sure that the power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
1
After turning the power switch on, the LCD
shows:
Press Set.
2
Press the or to select your language
and press Set.
3
If your language is selected, press
(Yes).
You can change the contrast to help the LCD look
lighter or darker.
1
Press Menu and or to select
1.General Setup
.
Press Set.
2
Press or to select
5.LCD Contrast
.
Press Set.
3
Press or to select
Light
or
Dark
.
Press Set.
4
Press Stop/Exit.
3 Install the Power Cord
4
Selecting Your
Language
Select Language
Press Set Key
English?
▲Yes ▼No
If you have set the language wrongly, you can
change the language from the control panel
menu of the machine. (For details, see “How
to change LCD language” in Chapter 6 of the
User”s Guide.)
5 Setting the LCD Contrast
General Setup
5.LCD Contrast
Step 1
To Next Page
Loading...
