Brother DCP-7010 - Important Information; Safety and Compliance; Disconnecting the Device

26
Installing the Drivers & Software
9
Select your model name, and then click OK.
Click OK again to close the
DeviceSelector.
0
Plug in the power cord and turn on the
machine.
A
Select Applications from the Go menu.
B
Open the Utilities folder.
C
Open the Printer Setup Utility icon.
D
Click Add.
E
Make the selection shown below.
F
Select Brother DCP-XXXX (XXXX is your
model name) and then click the Add button.
For Optional NC-2200w Users
(For External Wireless Print/Scan Server Users)
For Mac OS
®
X 10.2.x users, open Print
Center icon.
Step 2