Brother DCP-9040CN - Scan to USB (Not Available for DCP-9040 CN)

Scanning
166
9
• Duplex scan is supported by the MFC-9840CDW and DCP-9045CDN only.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
Scan to USB (Not available for DCP-9040CN) 9
You can scan black and white and color documents directly to a USB Flash Memory Drive. Black and white
documents will be stored in the PDF (*.PDF) or TIFF file formats (*.TIF). Color documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats. The default File names are based on the current date. You can
change the color, quality and file name.
For MFC-9440CN 9
a Put a USB flash memory drive into your machine.
b Load your document in the ADF or on the Scanner glass.
c Press the (Scan) key.
d Press a or b to choose Scan to USB.
Press OK.
e Choose one of the options below.
 To change the setting, choose 2. Change Setting. Press OK and go to f
 To start scanning with the settings you set in the Function Menu (Menu, 5, 2), choose 1.
Start Scan. Press OK and go to i.
f Press a or b to choose the quality you want.
Press OK.
g Press a or b to choose the file type you want.
Press OK.
Note
• If you choose color in the resolution setting, you cannot choose TIFF.
• If you choose black and white in the resolution setting, you cannot choose JPEG.
Resolution File Format Options
Color 150 dpi JPEG / PDF
Color 300 dpi JPEG / PDF
Color 600 dpi JPEG / PDF
B&W 200 dpi TIFF / PDF
B&W 200x100 dpi TIFF / PDF