Brother DCP-9040CN - Settings in the Scanner Setup Dialog Box

Scanning
44
2
e Load your document again.
Note
Skip this step if you loaded the document on the scanner glass in a.
f Click Start.
This time only the chosen area of the document appears in the PaperPort™ 11SE window (or your
application window).
g In the PaperPort™ 11SE window, use the options available to refine the image.
Settings in the Scanner Setup dialog box 2
Image Type 2
Choose the output image type from Photo, Web or Text. Resolution and Scan Type will be altered for each
default setting.
The default settings are listed in the table below:
Resolution 2
You can choose a scanning resolution from the Resolution drop-down list. Higher resolutions take more
memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you
can choose and the available colors.
Image Type Resolution Scan Type
Photo Use for scanning photo images. 300 × 300 dpi 24-bit color
Web Use for attaching the scanned image to web pages. 100 × 100 dpi 24-bit color
Text Use for scanning text documents. 200 × 200 dpi Black & White
Resolution
Black & White/
Gray (Error Diffusion)
256 color
True Gray/24 bit color
100 × 100 dpi Yes Yes Yes
150 × 150 dpi Yes Yes Yes
200 × 200 dpi Yes Yes Yes
300 × 300 dpi Yes Yes Yes
400 × 400 dpi Yes Yes Yes
600 × 600 dpi Yes Yes Yes
1200 × 1200 dpi Yes No Yes
2400 × 2400 dpi Yes No Yes
4800 × 4800 dpi Yes No Yes
9600 × 9600 dpi Yes No Yes
19200 × 19200 dpi Yes No Yes