Brother DCP-9040CN - COPY; PC-FAX (PC-FAX Is MFC-9440 CN and MFC-9840 CDW Only)

ControlCenter2
190
10
COPY / PC-FAX (PC-FAX is MFC-9440CN and MFC-9840CDW only) 10
The Copy1-Copy4 buttons can be customized to let you use advanced copy and fax functions such as N in
1 printing.
To use the Copy buttons, configure the printer driver by clicking the button while holding down the Ctrl key.
Enter a name in Name for Copy (up to 30 characters) and choose Copy Ratio.
Choose the Resolution, Scan Type, Document Size, Duplex (two-sided) Scanning (if necessary), Show
Scanner Interface, Brightness and Contrast settings to be used.
Before finishing the Copy button configuration, set the Printer. Then choose your print settings from the
Presets pop-up menu, then click OK to close the dialog box. By clicking the configured copy button, the print
dialog box opens.
To copy, choose Copies & Pages from the pop-up menu.
To fax, choose Send Fax from the pop-up menu. (Sending a fax (MFC-9440CN and MFC-9840CDW
only) on page 155.)