Brother DCP-9040CN - Using the Scan Key

Network Scanning
195
11
Using the Scan key 11
Note
• If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.
• Choose your document layout from following table:
Document Layout Table
• Duplex scan is supported by the MFC-9840CDW and DCP-9045CDN only.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
Portrait Landscape LCD Message
Front Back Front Back
(L)edge
(Long edge)
Front Back Front Back
(S)edge
(Short edge)