To Next PageTo Next PageWhat to do if Brother Printer has connection failure between the machine and LT connector?
If you are experiencing a connection failure between your Brother printer and the LT connector, remove Tray 2 and then firmly push it back in.
What to do if Brother DCP-9042CDN has internal temperature sensor failure?
If your Brother printer is showing an internal temperature sensor failure, it could be due to a harness connection failure of the internal temperature sensor, in that case check the harness connection of the internal temperature sensor and reconnect it. Alternatively, it may be due to an Engine PCB failure, in that case replace the engine PCB ASSY.
What to do if Brother DCP-9042CDN shows Air intake fan (AIR) failure?
If your Brother printer indicates an air intake fan failure, try resolving the issue by turning the power off and then back on again.
What to do if Brother DCP-9042CDN Printer shows Belt cleaner release sensor failure?
If your Brother printer is displaying a belt cleaner release sensor failure, a simple solution is to turn the power off and then back on again.
What to do if Brother Printer shows Develop drive motor failure?
If your Brother printer shows a develop drive motor failure, you can try to resolve the issue by turning the power off and then back on again.
What to do if Brother Printer shows Belt drive motor failure?
If your Brother printer shows a belt drive motor failure, you can try to resolve the issue by turning the power off and then back on again.
What to do if Brother DCP-9042CDN shows Paper feed/belt cleaner motor failure?
If your Brother printer shows a paper feed/belt cleaner motor failure, you can try to resolve the issue by turning the power off and then back on again.
What to do if Brother DCP-9042CDN shows Drum drive motor 1 (K, Y) failure?
If your Brother printer shows a drum drive motor 1 (K, Y) failure, you can try to resolve the issue by turning the power off and then back on again.
What to do if Brother Printer shows Drum drive motor 2 (M, C) failure?
If your Brother printer shows a drum drive motor 2 (M, C) failure, you can try to resolve the issue by turning the power off and then back on again.
How to fix Laser diode failure (K) on Brother DCP-9042CDN?
To address a laser diode failure (K) on your Brother printer, try turning the power off and then back on again.
General