Brother DCP DCP-375CW - Wireless One-Push Configuration

Specifications
101
D
Wireless one-push configuration D
If your wireless access point supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC
1
)
or AOSS™, you can configure the machine easily without a computer. By pushing a button on the
wireless LAN router / access point and the machine, you can set up the wireless network and
security settings. See the user’s guide for your wireless LAN router / access point for instructions
on how to access one-push mode.
1
Push Button Configuration
Note
Access points/routers that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™
have the symbols shown below.