Brother DCP DCP-375CW - Machine Information; Checking the Serial Number; Reset; How to Reset

Troubleshooting and Routine Maintenance
75
B
Machine Information B
Checking the serial number B
You can see the machine’s serial number on
the LCD.
a Press Menu.
b Press a or b to choose
5.Machine Info.
Press OK.
c Press a or b to choose 1.Serial No.
Press OK.
XXXXXXXXX
d Press Stop/Exit.
Reset B
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you use this
operation when you dispose of the
machine.
Note
Unplug the interface cable before you
choose Network or All Settings.
How to reset B
a Press Menu.
b Press a or b to choose
0.Initial Setup.
Press OK.
c Press a or b to choose 4.Reset.
Press OK.
d Press a or b to choose the reset you
want.
Press OK.
e Press a or b to choose a Reset or
b Exit.
f Press a to confirm.