Brother DCP-J132W

36
NOTE
Checking the print alignment A
If your printed text becomes blurred or
images become faded, you may need to
adjust the print alignment after transporting
the machine.
a Press Menu.
b Press a or b to choose 1.Ink.
Press OK.
c Press a or b to choose 1.Test Print.
Press OK.
d Press a or b to choose Alignment.
Press OK.
e Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
f For the “A” pattern, press a or b to
choose the number of the test print that
has the least visible vertical stripes
(1-9).
Press OK.
Repeat this step for the B, C, D and E
patterns. In the example number 6 is the
best choice for A, B, C, D and E.
g Press Stop/Exit.
NOTE
i
When a print head
nozzle is clogged
the printed
sample looks like
this.
After the print
head nozzle is
cleaned, the
horizontal lines
are gone.
i
When the print
alignment is not
adjusted correctly,
text looks blurry
like this.
After the print
alignment is
adjusted correctly,
text looks like this.