Brother DCP-J140W

Routine maintenance
31
A
Note
Checking the print alignment A
You may need to adjust the print alignment
after transporting the machine if your printed
text becomes blurred or images become
faded.
a Press Menu.
b
Press a or b to choose 1.Ink.
Press OK.
c Press a or b to choose 1.Test Print.
Press OK.
d Press a or b to choose Alignment.
Press OK.
e Press Black Start or Color Start.
The machine starts printing the
Alignment Check Sheet.
f For the “A” pattern, press a or b to
choose the number of the test print that
has the least visible vertical stripes
(1-9). Press OK.
g For the “B” pattern, press a or b to
choose the number of the test print that
has the least visible vertical stripes
(1-9). Press OK.
h For the “C” pattern, press a or b to
choose the number of the test print that
has the least visible vertical stripes
(1-9). Press OK.
i For the “D” pattern, press a or b to
choose the number of the test print that
has the least visible vertical stripes
(1-9). Press OK.
j Press Stop/Exit.
i
When a print head
nozzle is clogged
the printed
sample looks like
this.
After the print
head nozzle is
cleaned, the
horizontal lines
are gone.