Brother DCP-J140W

13
For Wireless Network Users
Wireless Network
j Click Next. The settings will be sent to your
machine.
k Disconnect the USB cable between the
computer and the machine.
l Click Next to continue to install MFL-Pro Suite.
Wireless setup is now complete.
To install MFL-Pro Suite, continue to
step 14-e on page 15.
Now go to
Page 15
Note
• The settings will remain unchanged if you click
Cancel.
• If you want to manually enter the IP address
settings of your machine, click Change IP
Address and enter the necessary IP address
settings for your network.
• If the wireless setup failure screen appears,
click Retry and try starting from step h again.