6
f Gently adjust the paper width guides to the
paper with both hands. Make sure that the
paper width guides touch the edges of the
paper.
g Close the output paper tray cover.
h Slowly push the paper tray completely into the
machine.
i While holding the paper tray in place, pull out
the paper support a until it clicks, and then
unfold the paper support flap b.
5
Check the print quality
a When the preparation process has finished, the
LCD shows Load Paper and Press Color
Start.
Press Color Start.
b Check the quality of the four color blocks on the
sheet. (black/yellow/cyan/magenta)
c If all lines are clear and visible, press + (Yes) to
finish the quality check and go to the next step.
If lines are missing, press - (No) and follow the
steps on the LCD.
OK
Poor
To Next Page
Loading...
