7
6
Set the date and time
The LCD displays the date and time. In addition,
setting the date and time allows the machine to clean
the print head regularly and maintain optimum print
quality.
a To enter the last two digits of the year, press a,
b, d or c to select the first number, and then
press OK. Repeat for the second number.
To save the two-digit year, press a, b, d or c to
select , and then press OK.
b Enter the two-digit month. Select and
press OK to save.
c Enter the two-digit day. Select and press
OK to save.
d Press a or b to choose 12h Clock or 24h
Clock, and then press OK.
e Enter the time. Select and press OK to
save.
f For 12h Clock only:
Press a or b to choose AM or PM, and then
press OK.
7
Wireless setup
(if needed)
When the Wi-Fi setup will start. message
appears on the LCD, read the message, and then
press OK to continue.
For wireless setup using a mobile device, go to a.
For Windows
®
and Macintosh users, go to b.
a Press a or b to choose Yes.
Press OK.
Go to step 10 on page 15 to continue with the
wireless setup.
b Press a or b to choose No.
Press OK.
Wireless setup instructions for Windows
®
and
Macintosh users will be covered later, starting
on page 15.
(e.g. Enter 1 3 for 2013.)
OK
OK
You can change date, time, or clock type (12h or
24h) at any time. For more information, see
Setting the date and time in the Basic User’s
Guide.
If a prompt message appears on the LCD, read it
and press OK to continue.
To Next Page
Loading...
