Brother DCP-J152W - Modifying SCAN Mode Settings (Windows); Changing PDF Scan Settings

How to scan to a computer
29
6
How to change the machine’s SCAN mode
settings for PDF scanning using ControlCenter4
(Windows
®
) 6
You can change your machine’s SCAN mode settings.
a (Windows
®
XP, Windows Vista
®
and Windows
®
7)
Open ControlCenter4 by clicking (Start)/All Programs/Brother/DCP-XXXX (where
XXXX is your model name)/ControlCenter4. The ControlCenter4 application will open.
(Windows
®
8)
Click (Brother Utilities), and then click the drop-down list and select your model name
(if not already selected). Click SCAN in the left navigation bar, and then click
ControlCenter4. The ControlCenter4 application will open.
b Make sure the machine you want to use is selected from the Model drop-down list.
c Click the Device Settings tab.
d Click Device Scan Settings.