Brother DCP-J315W - For Wireless Network Interface Users; Before You Begin

10
For Wireless Network Users
For wireless network interface users
11
Before you begin
IMPORTANT
If you have previously configured the wireless settings of the machine you must reset the network
(LAN) settings before you can configure the wireless settings again.
On your machine, press Menu. Press a or b to choose Network and press OK.
Press a or b to choose Network Reset, and then press OK.
Press twice to choose Yes.
Note
To set up your machine in Ad-hoc mode (connected to a wireless capable computer without an access
point/router) you can find instructions in the Network User’s Guide on the documentation CD-ROM.
Also you can download the Network User’s Guide by following the instructions below.
1 Turn on your computer. Insert the installation CD-ROM into your CD-ROM drive.
For Windows
®
:
2 Choose your model and the language. The CD-ROM top menu will appear.
3 Click Documentation, and follow the on-screen instructions.
For Macintosh:
2 Double-click Documentation, and follow the on-screen instructions.