4
f Take care to match the colour of the lever with
the cartridge colour.
g Install each ink cartridge in the direction of the
arrow on the label.
h Gently push the ink cartridge until it clicks. After
all the ink cartridges are installed close the ink
cartridge cover.
7
Check the print quality
a When the preparation process has finished, the
LCD shows Set Paper and Press Start.
Press Colour Start.
b Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c If all lines are clear and visible, press (Yes)
to finish the quality check and go to step 8 .
If you can see missing short lines, press
(No) and follow the steps on the LCD.
8
Set the LCD contrast
(if needed)
a Press Menu.
b Press a or b to choose General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose LCD Contrast.
Press OK.
e Press d or c to choose the contrast level.
Press OK.
f Press Stop/Exit.
9
Set the date and time
a Press Menu.
b Press a or b to choose Initial Setup.
Press OK.
c Press a or b to choose Date&Time.
Press OK.
d To enter the last two digits of the year, press a,
b, d or c to select a number and press OK. To
save the year, press a, b, d or c to select
and press OK.
e Repeat for month/day/time in 24-hour format.
f Press Stop/Exit.
OK
OK
To Next Page
Loading...
