19
For Network Users
Restore the network settings to factory default
To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a Make sure the machine is not operating.
b Press Menu.
c Press a or b to choose Network.
Press OK.
d Press a or b to choose Network Reset.
Press OK.
e Press to choose Yes.
f Press to choose Yes.
g The machine will restart, and the reset is complete.
Entering Text for Wireless Settings
Press a, b, d or c to select a letter, and press OK. Select and press OK to cycle between upper case, lower
case or special characters.
Inserting spaces
To enter a space, choose special characters. Then press a, b, d or c to select , and press OK.
Making corrections
If you entered an incorrect letter and want to change it, press a, b, d or c to select or . Press OK several
times to move the cursor under the incorrect character. Then press a, b, d or c to select , and press OK.
Re-enter the correct letter.
To Next Page
Loading...
