Brother DCP-J315W - Setting the DIM Timer for the Backlight

Chapter 1
2
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Dim Timer.
Press OK.
e Press a or b to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f Press Stop/Exit.