Brother DCP-J515W - Book Copy; Watermark Copy

Making copies
9
3
Book Copy 3
Book copy corrects dark borders and skew.
Your machine can correct the data
automatically or you can make specific
corrections.
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose Book Copy.
d Do one of the following:
 If you want to correct the data
yourself, press d or c to choose
On(Preview).
Press OK.
Press Mono Start or Colour Start
and go to step e.
 If you want the machine to correct
the data automatically, press d or c
to choose On and press OK.
Go to step f.
e Adjust the skewed data by using a or b.
Remove the shadows by using + or -.
f If you have finished making corrections,
press Mono Start or Colour Start.
Note
• Page Layout , Sort, Ink Save Mode,
Fit to Page and Watermark Copy
are not available with Book Copy.
• The Book Copy feature is supported by
technology from Reallusion, Inc.
Watermark Copy 3
You can place a logo or text into your
document as a Watermark. You can select
one of the template watermarks
(CONFIDENTIAL, DRAFT or COPY), data from
your media cards or USB Flash memory
drive, or scanned data.
Note
• Fit to Page, Page Layout,
Ink Save Mode and Book Copy are
not available with Watermark Copy.
•The Watermark Copy feature is
supported by technology from Reallusion,
Inc.
Using a template data 3
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose
Watermark Copy.
Press OK.
d Press d or c to choose On.
e Press a or b to choose
Current Setting.
Press OK.
f Press a or b to choose Template.
Press OK.
g Change the settings from the options
displayed on the LCD if required.
h If you do not want to change additional
settings, press Mono Start or
Colour Start.