Brother DCP-J515W - Adjusting Brightness, Contrast and Colour; Colour Enhancement

Printing photos from a memory card or USB Flash memory drive
21
4
Paper and print size 4
a Press a or b to choose Paper Size.
b Press d or c to choose the paper size
you are using, 10x15cm, 13x18cm, A4
or Letter.
Press OK.
c If you chose A4 or Letter, press b.
Then press d or c to choose the print
size.
Press OK.
d If you do not want to change additional
settings, press Colour Start to print.
Adjusting Brightness,
Contrast and Colour 4
Brightness 4
a Press a or b to choose Brightness.
b Press d or c to make a darker or lighter
print.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Contrast 4
You can choose the contrast setting.
Increasing the contrast will make an image
look sharper and more vivid.
a Press a or b to choose Contrast.
b Press d or c to change the contrast.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Colour Enhancement 4
You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower.
a Press a or b to choose
Color Enhance.
Press OK.
b Do one of the following:
 If you want to customize the
White Balance, Sharpness or
Color Density, press d or c to
choose On, and then go to step c.
 If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
Example: Printed Position for A4 paper
1
8 x 10cm
2
9 x 13cm
3
10 x 15cm
4
13 x 18cm
5
15 x 20cm
6
Max. Size