Chapter 4
24
Scan to a memory card 
or USB Flash memory 
drive
4
Auto Crop 4
You can scan multiple documents placed on 
the scanner glass. An individual document 
can be previewed on the LCD before you 
save it. When you choose Auto Crop, the 
machine will scan each document and create 
separate files. For example, if you place three 
documents on the scanner glass, the 
machine will scan and create three separate 
files. If you want to create a three page file, 
choose PDF or TIFF for File Type. 
(If you choose JPEG, each document is 
created as three separate files.)
 
1 10 mm or greater (top, left, right)
2 20 mm or greater (bottom)
Auto Crop is supported by technology 
from Reallusion, Inc. 
 
a Make sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
b Load your document.
c Press (SCAN).
d Press a or b to choose 
Scan to Media.
Press OK.
e Press a or b to choose Auto Crop.
f Press d or c to choose On.
Press OK.
g If you do not want to change additional 
settings, press Mono Start or 
Colour Start to start scanning. 
h The number of the scanned documents 
appears on the LCD.
Press OK.
i Press d or  c to preview each document 
data.
j Press OK to save the data.