Brother DCP-J562DW - Page 461

Home > Troubleshooting > Error and Maintenance Messages > Transfer Your Faxes or Fax Journal
Report > Transfer the Fax Journal Report to Another Fax Machine
Transfer the Fax Journal Report to Another Fax Machine
Related Models: MFC-J480DW/MFC-J680DW/MFC-J880DW
If you have not set up your Station ID, you cannot enter fax transfer mode.
>> MFC-J480DW
>> MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Press Stop/Exit to interrupt the error temporarily.
2. Press Settings.
3. Press a or b to select the following:
a. Select [Service]. Press OK.
b. Select [Data Transfer]. Press OK.
c. Select [Report Trans.]. Press OK.
4. Enter the fax number where Fax Journal report will be forwarded.
5. Press Mono Start.
MFC-J680DW/MFC-J880DW
1. Press to interrupt the error temporarily.
2. Press [Settings] > [All Settings] > [Service] > [Data Transfer] > [Report
Transfer].
3. Enter the fax number where the Fax Journal report will be forwarded.
4. Press [Fax Start].
Related Information
• Transfer Your Faxes or Fax Journal Report
• Set Your Station ID
455