Brother DCP-J925DW - Warning LED Indications

General information
7
1
c Press General Setup.
d Press a or b to display Paper Type.
e Press Paper Type.
f Press Inkjet Paper.
Note
Press to go back to the previous
level if necessary.
g Press Stop/Exit.
Warning LED indications 1
The Warning LED (light emitting diode) is a
light that shows the status of the machine, as
shown in the table.
LED DCP status Description
Off
Ready The DCP is ready for
use.
Red
Cover open The cover is open. Close
the cover. (See Error
and Maintenance
messages uu page 45.)
Cannot Print Replace the ink cartridge
with a new one. (See
Replacing the ink
cartridges uu page 39.)
Paper error Put paper in the tray or
clear the paper jam.
Check the LCD
message. (See Error
and Maintenance
messages uu page 45.)
Other
messages
Check the LCD
message. (See Error
and Maintenance
messages uu page 45.)