Brother DCP-J925DW - Beeper Volume and LCD Brightness

Chapter 1
8
Beeper Volume 1
When the beeper is on, the machine will beep
when you press a key, or make a mistake.
You can choose a range of beeper volume
levels, from High to Off.
a Press Menu.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Beeper.
e Press Beeper.
f Press Low, Med, High or Off.
g Press Stop/Exit.
LCD display 1
Setting the backlight
brightness 1
If you are having difficulty reading the LCD,
try changing the brightness setting.
a Press Menu.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display LCD Settings.
e Press LCD Settings.
f Press Backlight.
g Press Light, Med or Dark.
h Press Stop/Exit.