Brother DCP-J925DW - Page 80

72
Menu (continued) C
Network
(Continued)
Network I/F — Wired L AN*
WLAN
— You can choose
the network
connection type.
See .
Network Reset — — — Restore all
network settings
to factory default.
Level1 Level2 Level3 Options Descriptions Page
Print Reports U ser Settings — — Prints these lists and
reports.
See .
Network Config ——
WLAN Report ——
Machine Info. S erial No. — — Lets you check the serial
number of your machine.
66
Initial Setup D ate&Time — — Sets the date and time in
your machine.
See .
Reset Network — Resets the print server
back to its factory default
settings, such as the
password and IP address
information.
66
All Settings — Resets all the machine’s
settings back to the
factory default.
Local Language — (Choose the
language you
want to use)
Allows you to change the
LCD language for your
country.
See .
Disc Print
Alignment
— — You can align the print
position.
See .
Advanced User’s Guide
Quick Setup Guide
Software User’s Guide
The factory settings are shown in Bold with an asterisk.
Level1 Level2 Level3 Level4 Options Descriptions Page
Network User’s Guide
The factory settings are shown in Bold with an asterisk.