Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the
product is in a safe location where it cannot be accidentally knocked over, which could cause
injury to you or others and serious damage to the product.
Ensure that cables and cords leading to the product are secured so as not to pose a tripping
hazard.
DO NOT place heavy objects on the product.
DO NOT place any objects around the product. Such objects block the access to the power
outlet in case of emergency. It is important that the product can be unplugged whenever
needed.
The product may generate odorous gas such as ozone if used for a large volume of printing or
used in a poorly ventilated room for multiple hours. In addition, the product emits some
chemical substances during the printing process. Ensure adequate ventilation for the product
to avoid injury or discomfort.
IMPORTANT
• DO NOT place your product next to devices that contain magnets or generate magnetic
fields. Doing so may interfere with the operation of the product, causing print quality
problems.
• DO NOT place your product next to sources of interference, such as speakers or the base
units of cordless telephones. Doing so may interfere with the operation of the product's
electronic components.
Connect the Product Safely
WARNING
ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock. In
addition, you could cause a short circuit, which may create the risk of fire.
5
To Next Page
Loading...
Need help?
General