2
2
Changing the control
panel (if needed)
a Remove the original control panel from the
machine with both hands. Then attach the
control panel of your chosen language.
3
Connect the power cord
The machine must be fitted with an earthed
plug.
a Connect the power cord.
4
Choose your language
a When the LCD shows this message, press OK.
Select Language
q
Press OK Key
b Press a or b to choose your language and
press OK.
c Press a (Yes) to confirm the language setting.
5
Fill the ink tanks
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
a Make sure that the power is turned on.
b Open the ink tank cover a.
DO NOT connect the USB cable yet (if you are
using a USB cable).
• The Warning LED on the control panel will stay
on until you have filled the ink tanks.
• To prolong the life of the print head, provide the
best ink economy and maintain print quality, we
do not recommend unplugging the machine
frequently and/or leaving the machine
unplugged for extended periods of time. Each
time you plug the machine in, it automatically
cleans the print head, which uses some of your
ink.
We recommend using to power down the
machine. Using allows minimal power to
the machine, resulting in periodic, but less
frequent, cleaning of the print head.
DO NOT shake the ink bottles. If ink stains your
skin or clothing, wash with soap or detergent at
once.
Make sure you use the Introductory Ink bottles
included with your machine first.
To Next Page
Loading...
