Brother FAX 255 User Manual

37
SETUP SEND
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving
tones before sending the fax.
1
Insert the document face down in the feeder.
2
Pick up the handset and listen for a dial tone
—OR—Press
Hook
and listen for a dial tone.
3
Enter the fax number you want to call (you can enter the digits using
the dial pad, or you can enter a One Touch or Speed Dial number or you
can call from the Tel-index).
4
When you hear the fax tone, press
Start
.
5
If you’re using the handset, hang up.
Automatic Transmission
This is the easiest way to send a fax. IMPORTANT: Do not pick up the
handset, or press
Hook
.
1
Insert the document face down in the feeder.
2
Enter the fax number from One Touch, Speed Dial, Tel-index or the dial
pad.
3
Press
Start
.
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press
Redial/Pause
to
retry the number.
If you’re sending a fax automatically and the line is busy, the fax machine
will redial automatically up to three times at 5 minute intervals.
See
Speed Dialing
p. 48
See
One-Touch
Dialing
p. 48

Brother FAX 255 Specifications

General

Type	Plain Paper Fax
Print Technology	Thermal Transfer
Fax Modem Speed	14.4 Kbps
Automatic Document Feeder	Yes
Paper Tray Capacity	50 sheets
Memory Transmission	Yes
Copier Function	Yes
Fax/Telephone Switch	Yes
Compression	MH/MR/MMR
Telephone Index	Yes
Print Resolution	203 x 392 dpi
Memory	Approx. 512 KB
Connectivity	Telephone Line
Automatic Document Feeder (ADF)	10 sheets
Speed Dial Locations	100 locations