Brother FAX-2845 - Fax Detect

Receiving a fax
27
5
Fax Detect 5
If FaxDetect is On: 5
The machine can receive a fax automatically,
even if you answer the call. When you see
Receiving on the LCD or hear a click on the
phone line through the handset you are
using, just replace the handset. Your
machine will do the rest.
(For FAX-2845) 
If Fax Detect is Semi: 5
The machine will only receive a fax call
automatically if you answered it using the
machine’s handset.
If you answered at an extension or external
telephone, press l51. (See Operation from
external or extension telephones
uu page 31.)
If Fax Detect is Off: 5
If you are at the machine and answer a fax
call by lifting the handset of an external
telephone or the machine (FAX-2845),
(FAX-2840 and FAX-2940)
press Start.
(FAX-2845)
press Tel/Mute/R and then Start if you lift the
handset on the external telephone or press
Start if you lift the handset on the machine.
If you answered at an extension or external
telephone press l51. (See Operation from
external or extension telephones
uu page 31.)
Note
• If this feature is set to On, but your
machine does not connect a fax call when
you lift an extension telephone handset,
press the fax receive code l51.
• If you send faxes from a computer on the
same telephone line and the machine
intercepts them, set Fax Detect to Off.
a Make sure you are in FAX mode .
b Press Menu, 2, 1, 3.
c Press a or b to choose On, Semi (for
FAX-2845) or Off.
Press OK.
d Press Stop/Exit.