Brother FAX-2890 - How to Change the SCAN Key Settings for PDF Scanning (Windows )

Chapter 11
46
How to change the SCAN key settings for PDF
scanning (Windows
®
) 11
You can change your machine’s SCAN key settings using ControlCenter4 (Windows
®
).
a Open ControlCenter4 by clicking Start/All Programs/Brother/XXX-XXXX (where XXX-
XXXX is your model name)/ControlCenter4. The ControlCenter4 application will open.
b Make sure the machine you want to use is selected from the Model pull-down list.
c Click the Device Settings tab.
d Click Device Scan Settings.