Brother FAX-565 User Manual

REMOTE FAX OPTIONS 8 - 2
Programming your pager number
When Paging is selected, the fax machine dials the pager number
you’ve programmed, and then dials your Personal Identification
Number (PIN). This activates your pager so you will know that you
have a fax message in the memory.
1
Press
Menu/Set
,
8
,
1
.
2
Press or until the LCD
shows
PAGING?
.
Press
Menu/Set
.
3
Enter your pager phone number
(up to 20 digits).
Followed by
# #
.
Press
Menu/Set
.
Do not include the area code if it is the same as that of the fax
machine.
For example, press
1 8 0 0 5 5 5 1 2 3 4 # #
.
4
If your pager needs a PIN, enter the
PIN, press
#
, press
Redial/Pause
,
enter your fax number followed by
# #
.
Press
Menu/Set
.
(For example, press
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1
2 8 4 6 # #
)
—OR—
If you do not need a PIN, press
Redial/Pause
, enter the fax
number of the fax machine followed by
# #
.
Press
Menu/Set
.
(For example, press
Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
)
5
Press
Stop/Exit
.
You cannot change a Paging number or PIN remotely.
1.FAX FWD/PAGING
PAGING?
PAG#:
PIN#:

Brother FAX-565 Specifications

General

Type	Plain Paper Fax
Modem Speed	14.4 Kbps
Automatic Document Feeder Capacity	10 sheets
Out-of-Paper Reception	Yes
Fax/Telephone Switch	Yes
Polling	Yes
Delayed Transmission	Yes
Broadcasting	Yes
Paper Tray Capacity	50 sheets
Transmission Speed	Approx. 6 seconds per page