J
Joseph GreenSep 12, 2025
Why is nothing printed on the page from my Brother FAX-8360P?
- MMelissa FlemingSep 12, 2025
Make sure that the toner cartridge is not empty. If the toner cartridge is empty, replace the toner cartridge.
Why is nothing printed on the page from my Brother FAX-8360P?
Make sure that the toner cartridge is not empty. If the toner cartridge is empty, replace the toner cartridge.
Why does my Brother FAX-8360P Fax Machine not answer when called?
Make sure the machine is in the correct receiving mode for your setup (either Fax, Fax/Tel (F/T) or TAD). Check for dial tone. If possible, call the machine to hear it answer. If there is still no answer, check the telephone line cord connection. If there is no ringing when you call the machine, call your Telephone Company to check the line.
What to do if my Brother FAX-8360P Fax Machine says 'CHANGE TONER'?
If your Brother Fax Machine displays 'CHANGE TONER' and the Toner Empty LED is flashing, it means the toner is low. While you can still print for a short time, it's best to order a new toner cartridge now.
What does 'CONNECTION FAIL' mean on Brother Fax Machine?
If your Brother Fax Machine displays 'CONNECTION FAIL', you tried to poll a fax machine that isn't in Polled Waiting mode. Verify the other party's polling setup.
Why are printed pages marked at regular intervals from my Brother FAX-8360P?
Markings may disappear by themselves. Try copying at multiple pages to clear this problem.
What causes 'COMM.ERROR' on Brother FAX-8360P?
If your Brother Fax Machine displays 'COMM.ERROR', a poor-quality phone line caused a communication error. Try the call again.
Why does the receiving party see vertical streaks on faxes from my Brother FAX-8360P?
Clean your scanner and make a copy to check if the problem was caused by the machine.
Why does my Brother FAX-8360P not load paper and shows CHECK PAPER or PRINTER JAM?
Check to see if the CHECK PAPER or PRINTER JAM message appears on the LCD. If so, the paper tray may be out of paper. If it is empty, load a new stack of paper into the tray. If there is paper in the paper tray, make sure it is straight. If the paper is curled, you should straighten it. Sometimes it is helpful to remove the paper, turn the stack over and put it back into the paper tray. Reduce the amount of paper in the paper tray, then try again.
Why does my Brother Fax Machine say 'DISCONNECTED'?
If your Brother Fax Machine displays 'DISCONNECTED', the other party or their fax machine ended the call. Try re-transmitting or calling the other party to see what happened.
How to resolve 'CHECK PAPER SIZE' error on Brother FAX-8360P?
If your Brother Fax Machine displays 'CHECK PAPER SIZE', it means the paper size is not correct for fax receiving. Load A4 paper in the tray.
Instructions for sending faxes automatically and with cover pages.
Details on selecting and managing fax receive modes.
Initial setup procedures including date/time and custom settings.
Instructions for sending faxes, including scanning and resolution.
Guide to setting receive modes and receiving faxes.
Covers advanced sending features like cover pages and overseas mode.
Guides on resolving errors, jams, and performing maintenance.
Crucial safety instructions and warnings for product operation.
| Modem speed | 33.6 Kbit/s |
|---|---|
| Color faxing | No |
| Auto-redialing | Yes |
| Print technology | Laser |
| Fax transmission speed | 2 sec/page |
| Fax speed dialing (max numbers) | 235 |
| Grayscale levels | 64 |
| Maximum number of copies | 99 copies |
| Copy speed (black, normal quality, A4) | 14 cpm |
| Copy resolution (black text) | 600 x 300 DPI |
| Standard input capacity | 500 sheets |
| Standard output capacity | 150 sheets |
| Auto document feeder (ADF) input capacity | 30 sheets |
| Maximum print size | 210 x 297 mm |
| Fax memory | 40 MB |
| Power consumption (typical) | 70 W |
| Weight | 12000 g |
|---|---|
| Dimensions (WxDxH) | 377 x 442 x 323 mm |