Brother GTX Series - Environmental Conditions; Mandatory Temperature & Humidity Requirements

> Mandatory Temperature & Humidity Requirements :
ENVIRONMENTAL CONDITIONS
Required to keep the warranty! Temperature & Humidity are recorded in the Log le!
Go to the menu: Maintenance > Temperature/Humidity info >
OK
MENU
If not enough, please install a humidier !
18
MIN
TEMPERATURE
30
MAX
C
°
°
HUMIDITY
35
MIN
85
MAX
%
Min Firmware v2.5
PRE-TREATMENT RATIO
PRE-TREATMENT QUANTITY on T-SHIRTS
Don’t forget that you have to dene a surface of 14 X 16 inches (35 X 40 cm) with your
Pre-Treatment machine to weight with a scale after applying the PT liquid on a T-shirt!
> For example, on a Schulze PTM, you should enter a lenght of 36 cm and the full width with 4 nozzles will be 40 cm!
2
1 Liter
1,25 Kg
Pre
Treatment
Solution
2 Liters
2 Kg
Distilled
Water
3 Liters
3,25 Kg
PreTreatment
Ready to Use
+ =
Pre
Treatment
Ready to use
=
30 Grams
24-27 Gr.
14-17 Gr.
DARK Ts
MEDIUM Ts
LIGHT Ts
Quantity
=
==
==
> If temperature too cold, printer will switch automatically to Low-Temp Mode and reduce the speed !