APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 17 
4.2  Use Download Fonts 
Command 
ESC ( # X   Designates soft font # as Primary 
ESC ) # X   Designates soft font # as Secondary 
** # = font ID number 
Available Devices 
F, A, H, I 
Description 
The download fonts saved in the device can be selected from the PCL command language as well as saving 
download fonts in printer memory.  
The priority for searching is as follows; 
1.  Font in printer memory 
2.  Font in Card 1 
3.  Font in Card 2 
4.  Font in Internal HDD 
The above priority is never affected by the select storage device command (ESC CR ! 12358F). 
The download fonts can be also selected from the font select command in PCL. 
For HL-6050/6050D/6050DN printers, the priority for searching is as follows; 
1.  Font in printer memory 
2.  Font in Card 
3.  Font in Internal flash memory 
For HL-8050N/2700CN printers, the priority for searching is as follows; 
1.  Font in printer memory 
2.  Font in Card 
Error 
N/A