Brother HL-1430 - For Parallel Interface Cable Users; Connecting the Printer to Your PC and Installing the Driver

14
Installing the Driver
Connecting the Printer to Your PC and Installing the Driver
1 Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2 Select the Parallel interface.
3 Turn off the printer power switch.
4 Connect the parallel interface cable to your
PC, and then connect it to your printer.
5 Turn on the printer power switch.
6 Click the Next button when the movie
finishes.
For Parallel Interface Cable Users
If the Found New Hardware Wizard
appears on your PC, click the Cancel
button.
C
A
N
C
E
L
Continue to
the next page
Step 2